forums.xandros.com

[maspalomas]

Yes.

I use X4. My scanner is detected as a network device.

"xsane" and "kooka" do not recognize my HP scanner. But they accept as scanner my TV capture card (Pinnacle PCTV)!

I installed linux drivers (it is hp3900 http://sourceforge.net/projects/hp3900-series/) both as stand-alone and as SANE backend, and also all needed libraries. When I run hp3900 stand-alone app my scanner works (I mean, it moves) but no front-end window is opened.

I disconnected scanner, and restarted Xandros. Later I connected the scanner but it is the same: it is a network device.

"sane-find-scanner" finds the scanner, but nothing changes.

When I tried to change device in xsane I can not find a proper file to select the scanner (drc or other) because ".conf" file is not accepted.

"scanimage -L" finds only the TV card

What must I do? Thank you.

(Please excuse my poor English)

(USB connected:
HP LaseJet 1020 printer (driver (¿!) ndiswrapper)
HP ScanJet 3800 scanner (driver usblp, OK)

~# lsusb
Bus 005 Device 005: ID 03f0:2605 Hewlett-Packard
Bus 005 Device 002: ID 03f0:2b17 Hewlett-Packard
Bus 005 Device 001: ID 0000:0000
Bus 004 Device 001: ID 0000:0000
Bus 003 Device 002: ID 050f:0003 KC Technology, Inc. KC82C160S Hub
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 001: ID 0000:0000

~# lspci
0000:00:00.0 Host bridge: Intel Corporation 82865G/PE/P DRAM Controller/Host-Hub Interface (rev 02)
0000:00:01.0 PCI bridge: Intel Corporation 82865G/PE/P PCI to AGP Controller (rev 02)
0000:00:1d.0 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #1 (rev 02)
0000:00:1d.1 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2 (rev 02)
0000:00:1d.2 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #3 (rev 02)
0000:00:1d.3 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #4 (rev 02)
0000:00:1d.7 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller (rev 02)
0000:00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev c2)
0000:00:1f.0 ISA bridge: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge (rev 02)
0000:00:1f.1 IDE interface: Intel Corporation 82801EB/ER (ICH5/ICH5R) IDE Controller (rev 02)
0000:00:1f.3 SMBus: Intel Corporation 82801EB/ER (ICH5/ICH5R) SMBus Controller (rev 02)
0000:00:1f.5 Multimedia audio controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) AC'97 Audio Controller (rev 02)
0000:01:00.0 VGA compatible controller: nVidia Corporation NV11 [GeForce2 MX/MX 400] (rev b2)
0000:02:02.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11)
0000:02:02.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11)
0000:02:05.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)

~# lsmod
Module Size Used by
wacom 16640 0
xt_tcpudp 4480 53
xt_state 3328 15
ip_conntrack_ftp 8688 0
cpufreq_conservative 8200 0
cpufreq_powersave 3200 0
cpufreq_ondemand 7820 1
cpufreq_stats 7360 0
p4_clockmod 7492 0
speedstep_lib 7172 1 p4_clockmod
freq_table 6560 2 cpufreq_stats,p4_clockmod
video 18052 0
thermal 15624 0
sony_acpi 8208 0
backlight 7040 1 sony_acpi
sbs 16168 0
processor 34760 1 thermal
i2c_ec 6272 1 sbs
fan 6148 0
iptable_nat 8580 0
ip_nat 19116 1 iptable_nat
container 5760 0
button 7952 0
ip_conntrack 49600 4 xt_state,ip_conntrack_ftp,iptable_nat,ip_nat
nfnetlink 8088 2 ip_nat,ip_conntrack
asus_acpi 17432 0
iptable_filter 4224 1
ip_tables 15220 2 iptable_nat,iptable_filter
x_tables 15236 4 xt_tcpudp,xt_state,iptable_nat,ip_tables
usblp 14464 0
ehci_hcd 31752 0
uhci_hcd 23820 0
usbcore 122628 5 wacom,usblp,ehci_hcd,uhci_hcd
floppy 58788 0
ide_floppy 19200 0
sg 31516 0
sr_mod 17828 0
ide_cd 40964 2
cdrom 39200 2 sr_mod,ide_cd
nls_cp437 6912 1
nls_iso8859_1 5248 2
xfs 495740 0
jfs 170340 0
ufsd 240416 1
vfat 13696 1
fat 38172 1 vfat
reiserfs 239604 1
raid10 24960 0
raid456 120848 0
xor 15624 1 raid456
raid1 23808 0
raid0 9728 0
md_mod 76948 4 raid10,raid456,raid1,raid0
dm_mirror 23248 0
bt878 12104 0
tuner 59944 0
bttv 170740 1 bt878
video_buf 25348 1 bttv
firmware_class 11136 1 bttv
ir_common 28932 1 bttv
compat_ioctl32 2560 1 bttv
i2c_algo_bit 10248 1 bttv
btcx_risc 6024 1 bttv
tveeprom 15504 1 bttv
videodev 25472 1 bttv
v4l1_compat 14596 1 videodev
v4l2_common 22400 3 tuner,bttv,videodev
8139too 27520 0
mii 6528 1 8139too
snd_intel8x0 32540 1
snd_ac97_codec 89636 1 snd_intel8x0
snd_ac97_bus 3456 1 snd_ac97_codec
snd_pcm_oss 43520 0
snd_mixer_oss 17280 1 snd_pcm_oss
snd_pcm 75140 3 snd_intel8x0,snd_ac97_codec,snd_pcm_oss
snd_timer 23940 1 snd_pcm
snd 53252 8 snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
soundcore 11104 1 snd
snd_page_alloc 11144 2 snd_intel8x0,snd_pcm
i2c_i801 8716 0
i2c_core 22272 6 i2c_ec,tuner,bttv,i2c_algo_bit,tveeprom,i2c_i801
shpchp 37540 0
pci_hotplug 33352 1 shpchp
intel_agp 23836 1
agpgart 34892 1 intel_agp
tsdev 8768 0
psmouse 38024 0
evdev 10752 0
fuse 43668 0
lp 13448 0
parport_pc 35012 1
parport 36040 2 lp,parport_pc
autofs4 22148 3
pppoe 15424 0
pppox 5128 1 pppoe
ppp_synctty 11264 0
ppp_async 12672 0
crc_ccitt 3328 1 ppp_async
ppp_generic 28820 4 pppoe,pppox,ppp_synctty,ppp_async
slhc 7680 1 ppp_generic
8250_pnp 10112 0
8250_pci 21376 0
8250 24356 2 8250_pnp,8250_pci
serial_core 21248 1 8250
dm_mod 57752 1 dm_mirror
reiser4 365784 1
ide_disk 16768 6
generic 6276 0 [permanent]
piix 11524 0 [permanent]
sd_mod 20352 0
scsi_mod 95240 3 sg,sr_mod,sd_mod

~# pcimodules
intel-agp
shpchp
uhci-hcd
ehci-hcd
intel-rng
shpchp
i8xx_tco
generic
piix
i2c-i801
i810_audio
snd-intel8x0
nvidiafb
rivafb
nvidia
bttv
bt878
btaudio
8139cp
8139too

etc/sane.d/hp3900.conf:
# Configuration file for the hp3900 backend
#

# HP Scanjet 3800
usb 0x03f0 0x2605

# HP Scanjet 3970c
usb 0x03f0 0x2305

# HP Scanjet 4070 Photosmart
usb 0x03f0 0x2405

# HP Scanjet 4370
usb 0x03f0 0x4105

# HP Scanjet G2710
usb 0x03f0 0x2805

# HP Scanjet G3010
usb 0x03f0 0x4205

# UMAX Astra 4900/4950
usb 0x06dc 0x0020

# BenQ 5550
usb 0x04a5 0x2211
_________________
A full Spanish version of Xandros Desktop is needed.
We prefer and love Xandros.

[Guzi]

Try running the command,

detect reset

This would remove the previous detection result and force a re-detection of hardware.

Then reboot the system with your scanner attached.

[maspalomas]