| View previous topic :: View next topic |
| Author |
Message |
Nekro_Psycho
Xplorer
Joined: 29 Nov 2006
Posts: 27
|
 Posted: Mon Feb 26, 2007 8:22 am Post subject: No mixer |
 |
|
Hi... i'm havin a problem with the audio in Xandros 4 home primium. Afeter install it there where no problems, but when i upgraded it to SP1 i missed the mixer, so i can't hear anything (i'm very sure that i upgraded it correctly. I followed instructions from the spanish forum about upgrading to SP1).
Here is an image that can help to understand the problem.
As u can notice, the sound card it's correctly detected, but there is no mixer.
Here is the ouput of the lshw command, if it help.
| Code: | OCASTRO:/home/ocastro# lshw
ocastro
description: Computer
product: K8Upgrade-VM800
version: 1.00
serial: 00000000
width: 32 bits
capabilities: smbios-2.3 dmi-2.3
configuration: uuid=00020003-0004-0005-0006-000700080009
*-core
description: Motherboard
product: K8Upgrade-VM800
physical id: 0
version: 1.00
serial: 00000000
slot: TBD
*-firmware
description: BIOS
vendor: American Megatrends Inc.
physical id: 0
version: P2.00 (11/30/2005)
size: 64KB
capacity: 448KB
capabilities: pci upgrade shadowing cdboot bootselect socketedrom edd int13floppy1200 int13floppy720 int13floppy2880 int5printscreen int9keyboard int14serial int17printer int10video acpi usb agp ls120boot zipboot biosbootspecification
*-cpu
description: CPU
product: AMD Athlon(tm) 64 Processor 3200+
vendor: Advanced Micro Devices [AMD]
physical id: 3
bus info: cpu@0
version: 15.12.2
serial: TBD
slot: CPUSocket
size: 2200MHz
capacity: 2200MHz
width: 64 bits
clock: 200MHz
capabilities: fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 syscall nx mmxext fxsr_opt x86-64 3dnowext 3dnow up pni lahf_lm ts fid vid ttp tm stc
*-cache:0
description: L1 cache
physical id: 4
slot: L1-Cache
size: 128KB
capacity: 128KB
capabilities: pipeline-burst internal varies data
*-cache:1
description: L2 cache
physical id: 5
slot: L2-Cache
size: 512KB
capacity: 512KB
capabilities: pipeline-burst internal varies unified
*-memory
description: System memory
physical id: 1
size: 447MB
*-pci:0
description: Host bridge
product: K8M800 Host Bridge
vendor: VIA Technologies, Inc.
physical id: d0000000
bus info: pci@00:00.0
logical name: /dev/fb0
version: 00
width: 32 bits
clock: 66MHz
capabilities: fb
configuration: depth=16 frequency=75.69Hz mode=1024x768 visual=truecolor xres=1024 yres=768
resources: iomemory:d0000000-d3ffffff
*-pci
description: PCI bridge
product: VT8237 PCI bridge [K8T800/K8T890 South]
vendor: VIA Technologies, Inc.
physical id: 1
bus info: pci@00:01.0
version: 00
width: 32 bits
clock: 66MHz
capabilities: pci normal_decode bus_master cap_list
*-display
description: VGA compatible controller
product: S3 Unichrome Pro VGA Adapter
vendor: VIA Technologies, Inc.
physical id: 0
bus info: pci@01:00.0
version: 01
size: 64MB
width: 32 bits
clock: 66MHz
capabilities: vga bus_master cap_list
resources: iomemory:f8000000-fbffffff iomemory:fd000000-fdffffff irq:201
*-storage
description: RAID bus controller
product: VIA VT6420 SATA RAID Controller
vendor: VIA Technologies, Inc.
physical id: f
bus info: pci@00:0f.0
version: 80
width: 32 bits
clock: 33MHz
capabilities: storage bus_master cap_list
configuration: driver=sata_via
resources: ioport:ec00-ec07 ioport:e800-e803 ioport:e400-e407 ioport:e000-e003 ioport:dc00-dc0f ioport:d800-d8ff irq:169
*-ide
description: IDE interface
product: VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE
vendor: VIA Technologies, Inc.
physical id: f.1
bus info: pci@00:0f.1
version: 06
width: 32 bits
clock: 33MHz
capabilities: ide bus_master cap_list
configuration: driver=VIA_IDE
resources: ioport:fc00-fc0f irq:169
*-ide
description: IDE Channel 0
physical id: 0
bus info: ide@0
logical name: ide0
clock: 33MHz
*-disk
description: ATA Disk
product: SAMSUNG SP0822N
physical id: 0
bus info: ide@0.0
logical name: /dev/hda
version: WA100-34
serial: S06QJ1JLB09034
size: 74GB
capacity: 74GB
capabilities: ata dma lba iordy smart security pm
configuration: smart=on
*-cdrom
description: IDE CD-ROM
product: TSSTcorp CD-ROM SH-C522C
physical id: 1
bus info: ide@0.1
logical name: /dev/hdb
version: TS03
capabilities: packet atapi cdrom removable nonmagnetic dma lba iordy audio
configuration: mode=udma2
*-usb:0
description: USB Controller
product: VT82xxxxx UHCI USB 1.1 Controller
vendor: VIA Technologies, Inc.
physical id: 10.3
bus info: pci@00:10.3
version: 81
width: 32 bits
clock: 33MHz
capabilities: uhci bus_master cap_list
configuration: driver=uhci_hcd
resources: ioport:cc00-cc1f irq:193
*-usbhost
product: UHCI Host Controller
vendor: Linux 2.6.18-dcc-smp uhci_hcd
physical id: 1
bus info: usb@4
logical name: usb4
version: 2.06
capabilities: usb-1.10
configuration: driver=hub maxpower=0mA slots=2 speed=12.0MB/s
*-usb:1
description: USB Controller
product: VT82xxxxx UHCI USB 1.1 Controller
vendor: VIA Technologies, Inc.
physical id: 10.2
bus info: pci@00:10.2
version: 81
width: 32 bits
clock: 33MHz
capabilities: uhci bus_master cap_list
configuration: driver=uhci_hcd
resources: ioport:c800-c81f irq:193
*-usbhost
product: UHCI Host Controller
vendor: Linux 2.6.18-dcc-smp uhci_hcd
physical id: 1
bus info: usb@3
logical name: usb3
version: 2.06
capabilities: usb-1.10
configuration: driver=hub maxpower=0mA slots=2 speed=12.0MB/s
*-usb:2
description: USB Controller
product: VT82xxxxx UHCI USB 1.1 Controller
vendor: VIA Technologies, Inc.
physical id: 10.1
bus info: pci@00:10.1
version: 81
width: 32 bits
clock: 33MHz
capabilities: uhci bus_master cap_list
configuration: driver=uhci_hcd
resources: ioport:c400-c41f irq:193
*-usbhost
product: UHCI Host Controller
vendor: Linux 2.6.18-dcc-smp uhci_hcd
physical id: 1
bus info: usb@2
logical name: usb2
version: 2.06
capabilities: usb-1.10
configuration: driver=hub maxpower=0mA slots=2 speed=12.0MB/s
*-usb:3
description: USB Controller
product: VT82xxxxx UHCI USB 1.1 Controller
vendor: VIA Technologies, Inc.
physical id: 10
bus info: pci@00:10.0
version: 81
width: 32 bits
clock: 33MHz
capabilities: uhci bus_master cap_list
configuration: driver=uhci_hcd
resources: ioport:c000-c01f irq:193
*-usbhost
product: UHCI Host Controller
vendor: Linux 2.6.18-dcc-smp uhci_hcd
physical id: 1
bus info: usb@1
logical name: usb1
version: 2.06
capabilities: usb-1.10
configuration: driver=hub maxpower=0mA slots=2 speed=12.0MB/s
*-usb:4
description: USB Controller
product: USB 2.0
vendor: VIA Technologies, Inc.
physical id: 10.4
bus info: pci@00:10.4
version: 86
width: 32 bits
clock: 33MHz
capabilities: ehci bus_master cap_list
configuration: driver=ehci_hcd
resources: iomemory:febff800-febff8ff irq:193
*-usbhost
product: EHCI Host Controller
vendor: Linux 2.6.18-dcc-smp ehci_hcd
physical id: 1
bus info: usb@5
logical name: usb5
version: 2.06
capabilities: usb-2.00
configuration: driver=hub maxpower=0mA slots=8 speed=480.0MB/s
*-isa UNCLAIMED
description: ISA bridge
product: VT8237 ISA bridge [KT600/K8T800/K8T890 South]
vendor: VIA Technologies, Inc.
physical id: 11
bus info: pci@00:11.0
version: 00
width: 32 bits
clock: 33MHz
capabilities: isa bus_master cap_list
*-multimedia
description: Multimedia audio controller
product: VT8233/A/8235/8237 AC97 Audio Controller
vendor: VIA Technologies, Inc.
physical id: 11.5
bus info: pci@00:11.5
version: 60
width: 32 bits
clock: 33MHz
capabilities: cap_list
configuration: driver=VIA 82xx Audio
resources: ioport:d000-d0ff irq:177
*-network
description: Ethernet interface
product: VT6102 [Rhine-II]
vendor: VIA Technologies, Inc.
physical id: 12
bus info: pci@00:12.0
logical name: eth0
version: 78
serial: 00:13:8f:72:d5:99
size: 100MB/s
capacity: 100MB/s
width: 32 bits
clock: 33MHz
capabilities: bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegociation
configuration: autonegociation=on broadcast=yes driver=via-rhine driverversion=1.4.1 duplex=full ip=192.168.0.139 link=yes multicast=yes port=MII speed=100MB/s
resources: ioport:d400-d4ff iomemory:febffc00-febffcff irq:185
*-pci:1
description: Host bridge
product: K8M800 Host Bridge
vendor: VIA Technologies, Inc.
physical id: 100
bus info: pci@00:00.1
version: 00
width: 32 bits
clock: 33MHz
*-pci:2
description: Host bridge
product: K8M800 Host Bridge
vendor: VIA Technologies, Inc.
physical id: 101
bus info: pci@00:00.2
version: 00
width: 32 bits
clock: 33MHz
*-pci:3
description: Host bridge
product: K8M800 Host Bridge
vendor: VIA Technologies, Inc.
physical id: 102
bus info: pci@00:00.3
version: 00
width: 32 bits
clock: 33MHz
*-pci:4
description: Host bridge
product: K8M800 Host Bridge
vendor: VIA Technologies, Inc.
physical id: 103
bus info: pci@00:00.4
version: 00
width: 32 bits
clock: 33MHz
*-pci:5
description: Host bridge
product: K8M800 Host Bridge
vendor: VIA Technologies, Inc.
physical id: 104
bus info: pci@00:00.7
version: 00
width: 32 bits
clock: 33MHz
*-pci:6
description: Host bridge
product: K8 [Athlon64/Opteron] HyperTransport Technology Configuration
vendor: Advanced Micro Devices [AMD]
physical id: 105
bus info: pci@00:18.0
version: 00
width: 32 bits
clock: 33MHz
*-pci:7
description: Host bridge
product: K8 [Athlon64/Opteron] Address Map
vendor: Advanced Micro Devices [AMD]
physical id: 106
bus info: pci@00:18.1
version: 00
width: 32 bits
clock: 33MHz
*-pci:8
description: Host bridge
product: K8 [Athlon64/Opteron] DRAM Controller
vendor: Advanced Micro Devices [AMD]
physical id: 107
bus info: pci@00:18.2
version: 00
width: 32 bits
clock: 33MHz
*-pci:9
description: Host bridge
product: K8 [Athlon64/Opteron] Miscellaneous Control
vendor: Advanced Micro Devices [AMD]
physical id: 108
bus info: pci@00:18.3
version: 00
width: 32 bits
clock: 33MHz
|
|
|
| Back to top |
|
 |
Doctore
Xandrosianschwing
Joined: 13 Jun 2006
Posts: 2697
Location: Finland
|
| Posted: Mon Feb 26, 2007 9:08 am Post subject: |
|
|
Normally hardware should be better recognised with SP1.
But, try alsaconfig. Open console, type "alsaconf", without qoutes
and follow instructions.
Doctore |
|
| Back to top |
|
|
Nekro_Psycho
Xplorer
Joined: 29 Nov 2006
Posts: 27
|
| Posted: Mon Feb 26, 2007 10:45 am Post subject: |
|
|
output for alsaconf:
| Quote: | ocastro@OCASTRO:~$ su
Password:
OCASTRO:/home/ocastro# alsaconf
Unloading ALSA sound driver modules: snd-seq-dummy snd-seq-oss snd-seq-midi snd- seq-midi-event snd-seq snd-via82xx snd-ac97-codec snd-ac97-bus snd-pcm-oss snd-m ixer-oss snd-pcm snd-timer snd-page-alloc snd-mpu401-uart snd-rawmidi snd-seq-de vice.
Building card database...
Running update-modules...
Loading driver...
Setting default volumes...
===============================================================================
Now ALSA is ready to use.
For adjustment of volumes, use your favorite mixer.
Have a lot of fun! |
After this.. there still no mixer....  |
|
| Back to top |
|
|
Doctore
Xandrosianschwing
Joined: 13 Jun 2006
Posts: 2697
Location: Finland
|
| Posted: Mon Feb 26, 2007 11:55 am Post subject: |
|
|
Did you also run "alsaconf" logged in as Administrator (root)
and not as normal user with admin privilegies?
Doctore |
|
| Back to top |
|
|
Doctore
Xandrosianschwing
Joined: 13 Jun 2006
Posts: 2697
Location: Finland
|
| Posted: Mon Feb 26, 2007 2:36 pm Post subject: |
|
|
Checked the Spanish section. Alltough im Finnish, but speaks Swedish (!) I didnt understand
everything. Sometimes when hitting the wall an effective solution is to do an fresh install. and then
install the Service Pack. It could be one solution. Having Service Pack burned on CD-Rom speeds up
the procedure. And after that install languagefiles, preferred applications etc.
Greetings, Hälsningar (swedish) Terveisä (finnish)
Doctore |
|
| Back to top |
|
|
jimallyn
Site Admin
Joined: 31 Jan 2003
Posts: 8195
Location: Wenatchee, Washington, USA
|
| Posted: Mon Feb 26, 2007 2:51 pm Post subject: |
|
|
Search for "mixer" in Xandros Networks and install the mixer of your choice. There are a dozen or so to choose from.
Jim
_________________
I refuse to live in a country like this - and I'm not leaving. - Michael Moore |
|
| Back to top |
|
|
Doctore
Xandrosianschwing
Joined: 13 Jun 2006
Posts: 2697
Location: Finland
|
| Posted: Mon Feb 26, 2007 3:01 pm Post subject: |
|
|
Verifying Sound Mixer is installed type "kmix"
(without qoutes, of corse) in Console.
Doctore |
|
| Back to top |
|
|
Nekro_Psycho
Xplorer
Joined: 29 Nov 2006
Posts: 27
|
| Posted: Wed Feb 28, 2007 9:53 am Post subject: |
|
|
| Quote: | Verifying Sound Mixer is installed type "kmix"
(without qoutes, of corse) in Console. |
I did it and nothing happend, no even a error message, just a clean promt
| Quote: | Search for "mixer" in Xandros Networks and install the mixer of your choice. There are a dozen or so to choose from.
Jim |
I uninstalled the kmix and reinstall it and nothing.... i serched for a new mixer and installed the alsamixer... but nothing. Shuld i sellect it form anywhere to be used?, if is it, I don't know where to do it, couse the combobox for selecting a mixer in the mixer windows doesn't contain anything.
 |
|
| Back to top |
|
|
Doctore
Xandrosianschwing
Joined: 13 Jun 2006
Posts: 2697
Location: Finland
|
| Posted: Wed Feb 28, 2007 10:22 am Post subject: |
|
|
Because of trying to fix Windows problems (too much) at daily work it has
become a bad manner to make security copys, format and install the OS again,
when strange problems appear and no solution seems to work. But at least in
the Windows world its often the fastest and many times best solution.
Something seems to gone terrible wrong with the update. Its fun to search the
problems. Sometimes the solution is easy, but on the other hand it could take more
time than necessary. The easiest and probably fastest solution might be to do an
clean minimal install, add servicepack (from CD), drivers and lastly applications
from Xandros Distribution Site. This takes a few hours, but then your computer
should be as god as new. Maybe...
Doctore |
|
| Back to top |
|
|
Nekro_Psycho
Xplorer
Joined: 29 Nov 2006
Posts: 27
|
| Posted: Wed Feb 28, 2007 10:49 am Post subject: |
|
|
| well, i didn't want to get to that solution... but, it seems like is the only one, at least the easyest one. |
|
| Back to top |
|
|
jimallyn
Site Admin
Joined: 31 Jan 2003
Posts: 8195
Location: Wenatchee, Washington, USA
|
| Posted: Wed Feb 28, 2007 3:13 pm Post subject: |
|
|
| Nekro_Psycho wrote: | | I uninstalled the kmix and reinstall it and nothing.... i serched for a new mixer and installed the alsamixer... but nothing. |
Are you saying that the mixer simply didn't show up in the Launch menu? Some applications do automatically when you install them, some don't, and you have to add them to the Launch menu manually. When you install a new mixer, if you don't see it in the Launch Menu, click Launch, Run Command..., enter the name of the mixer application, and click Run. If that brings up the mixer, and it works OK for you, then you can add it to the Launch menu by right clicking the Launch button, then click Menu Editor.
If I remember correctly, alsamixer is a console app. To run it in a much nicer graphical application, also install alsamixergui, and run that rather than alsamixer. (You still have to have alsamixer installed, alsamixergui just makes it look a little nicer.)
Jim
_________________
I refuse to live in a country like this - and I'm not leaving. - Michael Moore |
|
| Back to top |
|
|
redrum
Xandros Community Moderator
Joined: 05 Apr 2004
Posts: 2765
Location: Rapid City, South Dakota
|
| Posted: Thu Mar 01, 2007 12:46 am Post subject: |
|
|
| Doctore wrote: | | Alltough im Finnish, but speaks Swedish (!) |
Hey, just like Linus  From what I've heard, about 15 percent of Finns speak Sweedish as their milk tongue.
_________________
Beware of the man who would deny you access to information,
for in his heart he dreams himself your master. |
|
| Back to top |
|
|
Nekro_Psycho
Xplorer
Joined: 29 Nov 2006
Posts: 27
|
| Posted: Wed Mar 07, 2007 7:46 am Post subject: |
|
|
problem solved by reinstalling Xandros
Thanks everyone |
|
| Back to top |
|
|
|
FAQ
Search
Usergroups
Register
Profile
Log in to check your private messages
Log in
