 |
forums.xandros.com Xandros User Forums
|
| View previous topic :: View next topic |
| Author |
Message |
geekydude Xandrosianschwing
Joined: 29 May 2005 Posts: 2513 Location: Portland, OR
|
Posted: Sat Dec 09, 2006 11:41 pm Post subject: |
|
|
I love it!!!
I love all the wiggly goodness!
Thanks! _________________ geekydude
registered Linux user number 410045.
The source will be with you...always.... |
|
| Back to top |
|
 |
redrum Xandros Community Moderator

Joined: 05 Apr 2004 Posts: 2766 Location: Rapid City, South Dakota
|
Posted: Sun Dec 10, 2006 5:38 am Post subject: |
|
|
Hey no prob, glad you like it  _________________
Beware of the man who would deny you access to information,
for in his heart he dreams himself your master. |
|
| Back to top |
|
 |
rjmichaelson Xandrosian

Joined: 19 Oct 2005 Posts: 191 Location: Illinois
|
Posted: Tue Dec 12, 2006 12:21 pm Post subject: |
|
|
OK, this looks very cool, and despite the admonitions above, I have got to try this for my 7900 GT NVidia Card.
Balls to the Wall!
I will be interested to see how this works (if it works) on dual monitors. I have noticed that most Xandros screen savers do not work on both monitors concurrently. _________________ [img]http://img02.picoodle.com/img/img02/7/1/24/f_3bootsi_304cm_2aa66d3.jpg[/img]
Illinois Triple-Booter |
|
| Back to top |
|
 |
rjmichaelson Xandrosian

Joined: 19 Oct 2005 Posts: 191 Location: Illinois
|
Posted: Wed Dec 13, 2006 11:39 pm Post subject: Very cool, but had unexpected result... |
|
|
I followed the instructions to the letter, and the spinning desktop really works! Really amazing that you guys can figure out this stuff.
It did not choke my cat (although it annoyed the hell out of my dog), nor did it run off with my wife, and my desktop is not yet a doorstop.
I think I will have to figure out how to reverse the entire process, though. On my system there is an unfortunate side effect. Title bars no longer appear on the top of my windows, and that makes it impossible for me to drag around or resize windows.
On a dual monitor setup this is particularly problematic, because the windows open up by splitting themselves equally between the two monitors, making the information inside the windows difficult or impossible to use.
Disabling the secondary monitor resolves the split screen problem with windows but I am still unable to drag/resize windows. Perhaps I did not install the correct version of the driver. Still, this was a lot of fun. _________________ [img]http://img02.picoodle.com/img/img02/7/1/24/f_3bootsi_304cm_2aa66d3.jpg[/img]
Illinois Triple-Booter |
|
| Back to top |
|
 |
redrum Xandros Community Moderator

Joined: 05 Apr 2004 Posts: 2766 Location: Rapid City, South Dakota
|
Posted: Wed Dec 13, 2006 11:46 pm Post subject: |
|
|
Hmmm I think you may have not quite edited the xorg.conf file right.. I had that problem the first time myself.. That, or or there is a peculiarity using twin monitors.. If you followed my instructions you should have made a backup of your xorg.conf file.. Simply follow the 'If It bombs" section to undo what has been done.
Hope this helps. _________________
Beware of the man who would deny you access to information,
for in his heart he dreams himself your master.
Last edited by redrum on Thu Jan 04, 2007 2:58 am; edited 1 time in total |
|
| Back to top |
|
 |
geekydude Xandrosianschwing
Joined: 29 May 2005 Posts: 2513 Location: Portland, OR
|
Posted: Wed Dec 13, 2006 11:47 pm Post subject: Re: Very cool, but had unexpected result... |
|
|
| rjmichaelson wrote: | I followed the instructions to the letter, and the spinning desktop really works! Really amazing that you guys can figure out this stuff.
It did not choke my cat (although it annoyed the hell out of my dog), nor did it run off with my wife, and my desktop is not yet a doorstop.
I think I will have to figure out how to reverse the entire process, though. On my system there is an unfortunate side effect. Title bars no longer appear on the top of my windows, and that makes it impossible for me to drag around or resize windows.
On a dual monitor setup this is particularly problematic, because the windows open up by splitting themselves equally between the two monitors, making the information inside the windows difficult or impossible to use.
Disabling the secondary monitor resolves the split screen problem with windows but I am still unable to drag/resize windows. Perhaps I did not install the correct version of the driver. Still, this was a lot of fun. |
Try installing the 9742 driver, as your card will likely have better support in that driver (I think). _________________ geekydude
registered Linux user number 410045.
The source will be with you...always.... |
|
| Back to top |
|
 |
rjmichaelson Xandrosian

Joined: 19 Oct 2005 Posts: 191 Location: Illinois
|
Posted: Wed Dec 13, 2006 11:58 pm Post subject: |
|
|
Thanks, I am pretty sure I did install the 9742 driver.
To get things back to normal, all I had to do was disable the video effects in the control center, restart the computer, and reapply all the settings for my 2 monitors.
I notice that, even though the beta driver screen comes up when I restart the computer, I no longer have the option to enable the video effects in the control center.
No harm, no foul. Fun experiment, thanks! _________________ [img]http://img02.picoodle.com/img/img02/7/1/24/f_3bootsi_304cm_2aa66d3.jpg[/img]
Illinois Triple-Booter |
|
| Back to top |
|
 |
redrum Xandros Community Moderator

Joined: 05 Apr 2004 Posts: 2766 Location: Rapid City, South Dakota
|
Posted: Thu Dec 14, 2006 12:06 am Post subject: |
|
|
Hey, no problem, sorry it didn't work out for you
The hack provided gets around that problem, which is why one can't re-enable it.. The controls are hard coded to detect the installed card and only allow enabling the card if its on the proper list.. BoyLinux's hack just overrides that applet and manually enables 3d Desktop anyway.
Either driver **Should** work technically, but more cards are supported on the 97xx driver. Being as and how you have 3d with the new driver installed, that shouldn't be an issue.
If you get brave again, I'd be interested to hear the results with newer drivers and such.. Thanks for trying it out  _________________
Beware of the man who would deny you access to information,
for in his heart he dreams himself your master. |
|
| Back to top |
|
 |
patrickd Xplorer
Joined: 27 Dec 2004 Posts: 21
|
Posted: Thu Dec 14, 2006 12:48 am Post subject: |
|
|
| All working well for me, to, but, like rjmichaelson, I have lost the window decorations. I'm using a single monitor, followed the modifications using copy-and-paste. Any other suggestions? |
|
| Back to top |
|
 |
redrum Xandros Community Moderator

Joined: 05 Apr 2004 Posts: 2766 Location: Rapid City, South Dakota
|
Posted: Thu Dec 14, 2006 12:51 am Post subject: |
|
|
Please post your xorg.conf file so I can review it.. _________________
Beware of the man who would deny you access to information,
for in his heart he dreams himself your master. |
|
| Back to top |
|
 |
strawnman Xendrosian

Joined: 19 May 2003 Posts: 1394 Location: Big Town of Spearfish SD
|
Posted: Thu Dec 14, 2006 1:44 am Post subject: |
|
|
Redrum and Ed,
I have a request, I am running into a bit of a problem. My video card, an eVga Nvidia 6800 XT is not being enabled for 3d. I think I can manually change the xorg.conf file to fool xandros into thinking the card is similar to the pci id on another card, but this feat is beyond me. Last time I tried something like that was with version one when I was attempting to get my ASUS nvidia 4200 ti working. Anyway here is my file. Any suggestions let me know:
Section "ServerLayout"
Identifier "Xandros"
Screen "Screen1"
InputDevice "keyboard"
InputDevice "mouse"
InputDevice "stylus"
InputDevice "eraser"
InputDevice "cursor"
InputDevice "pad"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules/nvidia"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/X11/misc"
FontPath "/usr/share/fonts/X11/Type1"
FontPath "/usr/share/fonts/X11/100dpi"
FontPath "/usr/share/fonts/X11/75dpi"
FontPath "/usr/X11R6/lib/X11/fonts/Type1"
EndSection
Section "Module"
Load "ddc"
Load "int10"
Load "dbe"
Load "extmod"
Load "glx"
Load "record"
Load "bitmap"
Load "freetype"
Load "type1"
Load "vbe"
Load "xandetect"
EndSection
Section "ServerFlags"
Option "AllowMouseOpenFail"
EndSection
Section "InputDevice"
Identifier "keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
EndSection
Section "InputDevice"
Identifier "mouse"
Driver "mouse"
Option "Device" "/dev/input/mice"
Option "Protocol" "IMPS/2"
Option "Emulate3Buttons" "yes"
Option "ZAxisMapping" "4 5"
Option "CorePointer"
EndSection
Section "InputDevice"
Identifier "stylus"
Driver "wacom"
Option "Device" "/dev/input/wacom"
Option "USB" "on"
Option "Mode" "Relative"
Option "SendcoreEvents" "yes"
Option "Type" "stylus"
EndSection
Section "InputDevice"
Identifier "eraser"
Driver "wacom"
Option "Device" "/dev/input/wacom"
Option "USB" "on"
Option "Mode" "Relative"
Option "SendcoreEvents" "yes"
Option "Type" "eraser"
EndSection
Section "InputDevice"
Identifier "cursor"
Driver "wacom"
Option "Device" "/dev/input/wacom"
Option "USB" "on"
Option "Mode" "Relative"
Option "SendcoreEvents" "yes"
Option "Type" "cursor"
EndSection
Section "InputDevice"
Identifier "pad"
Driver "wacom"
Option "Device" "/dev/input/wacom"
Option "Mode" "Relative"
Option "USB" "on"
Option "Type" "pad"
EndSection
Section "Modes"
Identifier "Monitor1"
ModeLine "1024x768@75" 0.0 0 0 0 0 0 0 0 0
ModeLine "1024x768@60" 0.0 0 0 0 0 0 0 0 0
ModeLine "800x600@75" 0.0 0 0 0 0 0 0 0 0
ModeLine "800x600@60" 0.0 0 0 0 0 0 0 0 0
ModeLine "640x480@75" 0.0 0 0 0 0 0 0 0 0
ModeLine "1280x768@60" 0.0 0 0 0 0 0 0 0 0
ModeLine "640x480@60" 0.0 0 0 0 0 0 0 0 0
EndSection
Section "Monitor"
Identifier "Monitor1"
VendorName "SYN"
ModelName "237-S11"
### Comment all HorizSync and VertSync values to use DDC:
HorizSync 31.5 - 60.0
VertRefresh 73.0 - 77.0
Option "DPMS" "off"
EndSection
Section "Device"
Identifier "Device1"
Driver "nvidia"
VendorName "nVidia Corporation"
BoardName "NV42 [Geforce 6800 XT]"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "Screen1"
Device "Device1"
Monitor "Monitor1"
DefaultDepth 24
SubSection "Display"
Depth 8
EndSubSection
SubSection "Display"
Depth 15
EndSubSection
SubSection "Display"
Depth 16
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection
Section "Extensions"
Option "Composite" "Disable"
EndSection
Thanks,
Eric _________________ This is My Linux Box, GET YOUR OWN!
Registered Linux user number 374524
Xandros v.1 v.2 v.2 BE, v.3 ,v.3 BE, 3 OCE, Server v.1, v.4 Home v.4 Pro
 |
|
| Back to top |
|
 |
redrum Xandros Community Moderator

Joined: 05 Apr 2004 Posts: 2766 Location: Rapid City, South Dakota
|
Posted: Thu Dec 14, 2006 1:47 am Post subject: |
|
|
You should be able to force load the driver by typing xandrosxconfig --set-driver nvidia (4.0 SP1 and 4.1).
For reference, if you would type lspci -x and lspci -n and post the output, I'll make sure your card is on 'the list'
Thanks. _________________
Beware of the man who would deny you access to information,
for in his heart he dreams himself your master. |
|
| Back to top |
|
 |
strawnman Xendrosian

Joined: 19 May 2003 Posts: 1394 Location: Big Town of Spearfish SD
|
Posted: Thu Dec 14, 2006 2:13 am Post subject: |
|
|
lspci -x =
0000:00:00.0 Memory controller: nVidia Corporation CK804 Memory Controller (rev a3)
00: de 10 5e 00 06 00 b0 00 a3 00 80 05 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 5a 81
30: 00 00 00 00 44 00 00 00 00 00 00 00 ff 00 00 00
0000:00:01.0 ISA bridge: nVidia Corporation CK804 ISA Bridge (rev a3)
00: de 10 50 00 0f 00 a0 00 a3 00 01 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 5a 81
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0000:00:01.1 SMBus: nVidia Corporation CK804 SMBus (rev a2)
00: de 10 52 00 01 00 b0 00 a2 00 05 0c 00 00 80 00
10: 01 e4 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 01 4c 00 00 41 4c 00 00 00 00 00 00 43 10 5a 81
30: 00 00 00 00 44 00 00 00 00 00 00 00 0b 01 03 01
0000:00:02.0 USB Controller: nVidia Corporation CK804 USB Controller (rev a2)
00: de 10 5a 00 07 00 b0 00 a2 10 03 0c 00 00 80 00
10: 00 40 20 c3 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 5a 81
30: 00 00 00 00 44 00 00 00 00 00 00 00 05 01 03 01
0000:00:02.1 USB Controller: nVidia Corporation CK804 USB Controller (rev a3)
00: de 10 5b 00 06 00 b0 00 a3 20 03 0c 00 00 80 00
10: 00 00 b0 fe 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 5a 81
30: 00 00 00 00 44 00 00 00 00 00 00 00 03 02 03 01
0000:00:04.0 Multimedia audio controller: nVidia Corporation CK804 AC'97 Audio Controller (rev a2)
00: de 10 59 00 07 00 b0 00 a2 00 01 04 00 00 00 00
10: 01 dc 00 00 01 e0 00 00 00 30 20 c3 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 2a 81
30: 00 00 00 00 44 00 00 00 00 00 00 00 03 01 02 05
0000:00:06.0 IDE interface: nVidia Corporation CK804 IDE (rev f2)
00: de 10 53 00 05 00 b0 00 f2 8a 01 01 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 01 f0 00 00 00 00 00 00 00 00 00 00 43 10 5a 81
30: 00 00 00 00 44 00 00 00 00 00 00 00 00 00 03 01
0000:00:07.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller (rev f3)
00: de 10 54 00 07 00 b0 00 f3 85 01 01 00 00 00 00
10: f1 09 00 00 f1 0b 00 00 71 09 00 00 71 0b 00 00
20: 01 d8 00 00 00 20 20 c3 00 00 00 00 43 10 5a 81
30: 00 00 00 00 44 00 00 00 00 00 00 00 0b 01 03 01
0000:00:08.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller (rev f3)
00: de 10 55 00 07 00 b0 00 f3 85 01 01 00 00 00 00
10: e1 09 00 00 e1 0b 00 00 61 09 00 00 61 0b 00 00
20: 01 c4 00 00 00 10 20 c3 00 00 00 00 43 10 5a 81
30: 00 00 00 00 44 00 00 00 00 00 00 00 05 01 03 01
0000:00:09.0 PCI bridge: nVidia Corporation CK804 PCI Bridge (rev a2)
00: de 10 5c 00 07 01 a0 00 a2 01 04 06 00 00 01 00
10: 00 00 00 00 00 00 00 00 00 05 05 80 f0 00 80 a2
20: 00 c3 00 c3 10 c3 10 c3 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 02 02
0000:00:0a.0 Bridge: nVidia Corporation CK804 Ethernet Controller (rev a3)
00: de 10 57 00 07 00 b0 00 a3 00 80 06 00 00 00 00
10: 00 00 20 c3 01 b0 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 41 81
30: 00 00 00 00 44 00 00 00 00 00 00 00 0b 01 01 14
0000:00:0b.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3)
00: de 10 5d 00 07 05 10 00 a3 00 04 06 08 00 01 00
10: 00 00 00 00 00 00 00 00 00 04 04 00 f1 01 00 00
20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 00 00 02 00
0000:00:0c.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3)
00: de 10 5d 00 07 05 10 00 a3 00 04 06 08 00 01 00
10: 00 00 00 00 00 00 00 00 00 03 03 00 f1 01 00 00
20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 00 00 02 00
0000:00:0d.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3)
00: de 10 5d 00 07 05 10 00 a3 00 04 06 08 00 01 00
10: 00 00 00 00 00 00 00 00 00 02 02 00 f1 01 00 00
20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 00 00 02 00
0000:00:0e.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3)
00: de 10 5d 00 07 04 10 00 a3 00 04 06 08 00 01 00
10: 00 00 00 00 00 00 00 00 00 01 01 00 f1 01 00 20
20: 00 c0 f0 c2 01 b0 f1 bf 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 00 00 0a 00
0000:00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00: 22 10 00 11 00 00 10 00 00 00 00 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 80 00 00 00 00 00 00 00 00 00 00 00
0000:00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00: 22 10 01 11 00 00 00 00 00 00 00 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0000:00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00: 22 10 02 11 00 00 00 00 00 00 00 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0000:00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
00: 22 10 03 11 00 00 00 00 00 00 00 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0000:01:00.0 VGA compatible controller: nVidia Corporation NV42 [Geforce 6800 XT] (rev a2)
00: de 10 c3 00 07 00 10 00 a2 00 00 03 00 00 00 00
10: 00 00 00 c0 0c 00 00 b0 00 00 00 00 04 00 00 c1
20: 00 00 00 00 00 00 00 00 00 00 00 00 42 38 81 c3
30: 00 00 00 00 60 00 00 00 00 00 00 00 0b 01 00 00
0000:05:06.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 02)
00: 9e 10 6e 03 06 00 80 02 02 00 00 04 00 20 80 00
10: 08 00 10 c3 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 70 00 eb 13
30: 00 00 00 00 00 00 00 00 00 00 00 00 05 01 10 28
0000:05:06.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 02)
00: 9e 10 78 08 06 00 80 02 02 00 80 04 00 20 80 00
10: 08 10 10 c3 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 70 00 eb 13
30: 00 00 00 00 00 00 00 00 00 00 00 00 05 01 04 ff
0000:05:07.0 Ethernet controller: Atheros Communications, Inc. AR5005G 802.11abg NIC (rev 01)
00: 8c 16 1a 00 06 00 90 02 01 00 00 02 08 a8 00 00
10: 00 00 00 c3 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 01 50 00 00 86 11 16 3a
30: 00 00 00 00 44 00 00 00 00 00 00 00 03 01 0a 1c _________________ This is My Linux Box, GET YOUR OWN!
Registered Linux user number 374524
Xandros v.1 v.2 v.2 BE, v.3 ,v.3 BE, 3 OCE, Server v.1, v.4 Home v.4 Pro
 |
|
| Back to top |
|
 |
strawnman Xendrosian

Joined: 19 May 2003 Posts: 1394 Location: Big Town of Spearfish SD
|
Posted: Thu Dec 14, 2006 2:14 am Post subject: |
|
|
XAN0DFZWN33:~# lspci -n
0000:00:00.0 0580: 10de:005e (rev a3)
0000:00:01.0 0601: 10de:0050 (rev a3)
0000:00:01.1 0c05: 10de:0052 (rev a2)
0000:00:02.0 0c03: 10de:005a (rev a2)
0000:00:02.1 0c03: 10de:005b (rev a3)
0000:00:04.0 0401: 10de:0059 (rev a2)
0000:00:06.0 0101: 10de:0053 (rev f2)
0000:00:07.0 0101: 10de:0054 (rev f3)
0000:00:08.0 0101: 10de:0055 (rev f3)
0000:00:09.0 0604: 10de:005c (rev a2)
0000:00:0a.0 0680: 10de:0057 (rev a3)
0000:00:0b.0 0604: 10de:005d (rev a3)
0000:00:0c.0 0604: 10de:005d (rev a3)
0000:00:0d.0 0604: 10de:005d (rev a3)
0000:00:0e.0 0604: 10de:005d (rev a3)
0000:00:18.0 0600: 1022:1100
0000:00:18.1 0600: 1022:1101
0000:00:18.2 0600: 1022:1102
0000:00:18.3 0600: 1022:1103
0000:01:00.0 0300: 10de:00c3 (rev a2)
0000:05:06.0 0400: 109e:036e (rev 02)
0000:05:06.1 0480: 109e:0878 (rev 02)
0000:05:07.0 0200: 168c:001a (rev 01) _________________ This is My Linux Box, GET YOUR OWN!
Registered Linux user number 374524
Xandros v.1 v.2 v.2 BE, v.3 ,v.3 BE, 3 OCE, Server v.1, v.4 Home v.4 Pro
 |
|
| Back to top |
|
 |
redrum Xandros Community Moderator

Joined: 05 Apr 2004 Posts: 2766 Location: Rapid City, South Dakota
|
Posted: Thu Dec 14, 2006 2:25 am Post subject: |
|
|
Interesting... I have two of those in my box.. It's on the list alright. Not sure why Xandros Detect wouldn't find it, but the force should work.
Regards. _________________
Beware of the man who would deny you access to information,
for in his heart he dreams himself your master. |
|
| Back to top |
|
 |
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|